稀土La2O3改性脲醛树脂的黏度特性研究

脲醛树脂(UF树脂)胶黏剂具有胶合强度高、制作简单、成本低廉、原料来源丰富等一系列特点,成为我国人造板生产的主要胶种,是市场上需求量最大的胶黏剂之一。但由于在固化时会放出刺激性的甲醛,游离甲醛高,在使用时严重危害人的健康。近年来,随着人们环保意识的提高,生产和使用低毒UF树脂胶势在必行。本文介绍了稀土氧化镧对脲醛树脂的改性过程并对改性后脲醛树脂胶的各项性能进行了测试。本实验通过在不同反应阶段加入稀土氧化镧,分别探讨它们对脲醛树脂胶黏剂性能影响。实验表明:在脲醛树脂胶中加入稀土氧化镧可以增加黏度、固化时间、固含量,并可以减少游离甲醛释放量。     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

基于镧锶锰氧化物基阴极的中温固体氧化物燃料电池的性能优化研究

为了提高基于镧锶锰氧化物(LaxSr1-xMnO3,LSM)阴极的中温固体氧化物燃料电池(Solid Oxide Fuel Cell,SOFC)的电化学性能,文章利用CuO清扫Ce0.85Sm0.15O2-δ(SDC)晶界的SiO2杂质以提高SDC的离子电导率,制备了复合电解质材料SDC-CuO,并将SDC-CuO和LSM结合成复合阴极材料,随后分别制备了以LSM和LSM/SDC-CuO作为阴极的SOFC,并研究了这两种SOFC的电化学性能。研究结果表明:在开路电压和工作温度为800℃的条件下,LSM/SDC-CuO基阴极的SOFC的极化电阻为0.14Ω·cm2,明显低于LSM基阴极SOFC的极化电阻(0.36Ω·cm2);LSM/SDC-CuO基阴极的SOFC的最大输出功率密度为237 mW/cm2,显著高于LSM基阴极的SOFC的最大输出功率密度(132 mW/cm2)。     

Stochastic evaluation of leakages through holes in wrinkle networks of composite liners

This paper presents a study on stochastic evaluation of leakages through holes in wrinkle networks of composite liners. The statistical parameters of wrinkles are used as indexes to describe the spatial distributions of wrinkles in a wrinkle network and the wrinkle density is modeled as a random field in the proposed approach, which allows the construction of a database about how wrinkles may be distributed in different conditions and provides input parameters for leakage evaluation at the design stage when the site has not been constructed yet and the aerial image of the wrinkle network (AWN) is unavailable. Statistical analyses were performed on wrinkle geometric parameters and wrinkle density of wrinkles from three sites reported in the literature. The procedures of generating random wrinkle networks (RWNs) based on the statistical parameters of wrinkles are introduced. The proposed approach was applied to typical examples and showed sufficient accuracy when compared to the evaluated leakages based on the corresponding AWNs. Wrinkle density is recommended to be modeled as random field.     

Covalent triazine framework with efficient photocatalytic activity in aqueous and solid media

Covalent triazine frameworks (CTFs) have been recently employed for visible light-driven photocatalysis due to their unique optical and electronic properties. However, the usually highly hydrophobic nature of CTFs, which originates from their overall aromatic backbone, leads to limitations of CTFs for applications in aqueous media. In this study, we aim to extend the range of the application media of CTFs and design hybrid material of a CTF and mesoporous silica (SBA-15) for efficient photocatalysis in aqueous medium. A thiophene-containing CTF was directly synthesized in mesopores of SBA-15. Due to the high surface area and the added hydrophilic properties by silica, the hybrid material demonstrated excellent adsorption of organic molecules in water. This leads not only to high photocatalytic performance of the hybrid material for the degradation of organic dyes in water, but also for efficient photocatalysis in solvent-free and solid state. Furthermore, the reusability, stability and easy recovery of the hybrid material offers promising metal-free heterogeneous photocatalyst for broader applications in different reaction media.     

复合固体推进剂中固体填料的安息角测试与仿真

复合固体推进剂含有固体颗粒较多，离散单元法是一种适合固体推进剂生产过程数值仿真的有效方法，颗粒物料的接触参数是保证离散单元法仿真精度的关键。本文以复合固体推进剂的主要组分铝粉和高氯酸铵固体颗粒为研究对象，通过实验测试获得了相关物料的安息角，利用专业离散元软件EDEM仿真模拟了安息角测试实验过程，建立了物料安息角与接触参数之间的联系。研究表明，滚动摩擦系数和滑动摩擦系数越大，安息角越大，物料流动性越差。对比仿真与实验结果，通过逆向反推法确定了物料的滑动摩擦系数和滚动摩擦系数两个关键接触参数。铝粉与高氯酸铵1∶2混合颗粒的滑动摩擦系数为0.2，滚动摩擦系数为0.05。为固体推进剂加工生产过程离散元数值仿真提供了关键基础数据。     

固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量

目的建立固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量。方法样品用乙腈提取,经活性炭/氨基复合柱(Envi-Carb/NH_2)净化,经Rxi-5MS石英毛细管色谱柱分离,采用电子轰击源质谱检测,选择离子监测(selective ion monitoring,SIM)模式检测,外标法定量。结果扑草净在2~1000μg/L范围内具有良好的线性关系,相关系数r~2=0.9998。扑草净在5、10、20、50μg/kg 4种条件下,样品加标回收率在95.1%~107.9%,RSD在5.36%~7.77%(n=6),方法检出限为1μg/kg,定量限为4μg/kg。结论该方法操作简单,准确度与精密度较好,能快速简便地检测紫菜中扑草净的残留量。     

负压差对固体进料系统压力分布和气固两相流动规律的影响

A series of experiments on a solid feed system was performed to investigate the effects of negative pressure gradient on the gas-solid flow pattern and hydrodynamic characteristics. Based on the non-fluidized gas-solid two phase flow and particulate mechanics in the standpipe, a method for predicting the pressure of the air passing through the recycle chamber and the pressure drop through the loop seal slit in these systems is also presented. The predicted pressure profile along the negative pressure gradient from the proposed model exhibits a good agreement with the experimental data. The experimental data show that the gas flow in the standpipe is always upward in the negative pressure gradients, while the direction of gas cannot be changed by the drag force. The solid flow rate, the materiel bed height in the recycle chamber (Hf), the pressure drop across the slit (△Pg） decrease with an increasing negative pressure gradient. At a given negative pressure gradient, the superficial gas velocity through the recycle chamber of the loop seal does not affect the pressure drop in standpipe. It increases with an increasing negative pressure gradient.